Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Content Zone


Installing the printer integration won't take more than 15 minutes. All you need to install is two pieces of software, setup the printing pricing in credits in PaperCut and a Resource Rate in your currency in your Nexudus Spaces account.

Once you have PaperCut NG setup and working in your environment it will track users printing via your office print server. There are also options to charge for members' copying and scanning in more complex environments, please contact PaperCut for more information about PaperCut MF. Once you have PaperCut NG or MF working, you can install the Nexudus integration and the PaperCut software will validate that the member has enough credit.

The computer where PaperCut is installed, will also run the Nexudus Spaces PaperCut Extender, which will provide the bridge between PaperCut and your Nexudus Spaces account. Current, Nexudus Spaces PaperCut Extender only runs on Windows.

Nexudus is compatible with both NG and MF versions of PaperCut

Please follow the steps below to complete the integration:

Step 1. Download and Install PaperCut

Download the Windows version of PaperCut from here


Lauch the installation process and follow the wizard leaving all options as default. Make sure specially that the "Components to Install" page says "Standard Installation (primary server)".

Wait until the installation is finished and make sure the option "Open application and complete configuration" is checked.

Type an administration password. You will need this password later so make sure you can remember it.

Choose a license type based on the number of users and the level of service you want in PaperCut. If you are running the free 5 users license, the choose "Education".

In the next step you will define how much to charge for each printed page by default. Later you will be able to set different prices for each printer and/or print type, such as color, size, etc…

This cost must be the same as the cost of the Resource Rate representing 1 standard print in your Nexudus Spaces account.

Make sure the inital credit is set to zero and that users cannot print if they don't have credit.

Click on the image to make it larger

Select "Windows Standard" as the users source and finish the configuration wizard.

Once you are in the PaperCut administration panel click on "Options" and then "User/Group Sync"

Locate and activate the "Enable internal users" checkbox. Make sure all settings are as in the image below. Click "Apply".

In the main menu, click on "Options" and then "General".

Locate the "Display Options" section and change the currency settings as per the image below. Notice the space before "credits" in the "Custom sign" field.

Set all the printers you want members to use as “Unauthenticated printer”. This will mean users will have to enter a username and password to use the printer. This username and password will be automatically emailed to members with credits to print. To do this, access the details page of each of those printers.

Click on the image to make it larger

Scroll down to the “Advanced Configuration” section and enable the option Unauthenticated printer


 Enable popup authentication

Click "OK" to save the changes. 

Step 2. Install Nexudus Spaces PaperCut Extender

Nexudus Spaces PaperCut Extender will provide the link between the Nexudus Spaces servers and your PaperCut installation. Typically, you will install the Extender in the same PC where you installed PaperCut, but this is not required. You can install it in any Windows PC with access to the PaperCut installation.

  • Download and install Nexudus Spaces PaperCut Extender from here
  • If your machine dosen't have it. Install the Microsoft Visual C++ 2010 Redistributable Package
x86 PC:
x64 PC:

If you are running Windows 8, you may receive the following message. Just click on more info and then click on “Run Anyway”.

Click on the image to make it larger

Follow the instructions on the screen and complete the setup.

Once the installation has finished, the Extender will automatically load and show the configuration screen below.

Image RemovedImage Added

  1. The address of the PaperCut server. If you have installed the Extender in the same PC as PaperCut you can leave the default value "localhost"
  2. The admin password you chose when installing PaperCut.
  3. Click on "Connect". The button should go green if the connection is successful.
  4. The email address of the user you want to use to connect to your Nexudus Spaces account. Typically this would be any of the admin users in your account.
  5. The password the user selected in step 4.
  6. Click on "Connect". The button should go green if the connection is successful.
  7. Select which of the Resource Rates in your Nexudus Spaces account you want to represent a credit for printing.
  8. The product for PAYG printing cost
  9. Hide the extender


Make sure the price per page you set for this Resource Rate is the same as the standard price per page you set in PaperCut

Transferring users

PaperCut Extender will automatically create and remove user accounts in PaperCut based on the following criteria.

  • Anyone with the "Pay as you print" option enabled in the "PaperCut" section found in the "Integrations" tab will be permanently created as a unrestricted user in PaperCut
  • Anyone with currently available printing credit will be created as a restricted user in PaperCut and removed once the credit is used up or expired.

The credentials for those users will be based on:

  • The password of the user will be the pin-code set in the "Integrations" tab for those members in Nexudus.
  • The Card Number will be the "Access Card Id" in the "Integrations" tab for those members in Nexudus.

Printing Credits

Nexudus Spaces assigns printing credits in PaperCut based on how many units of a particular Resource Rate each member has.

This Resource Rate is the one you selected in step 7 in the last section, while configuring the PaperCut Extender. The price of this Resource Rate must be the same as the price you set standard printing price. When doing this, if you assign 100 units of this Resource Rate to a member, it will translate in 100 standard prints.

The Nexudus Spaces PaperCut Extender runs on the background and will synchronize your Nexudus Spaces account with your PaperCut installation every 5 minutes. You can trigger the synchronization process manually by clicking on the "Sync Now" button in the Extender settings page.

Example Pricing #1

Assuming you have a single price for all print types (b/w and color) at $0.05/print

  • Set papercut to have a price of "5 credits" for all page types.

  • Set your printers to use this pricing.

  • Set Nexudus to have a product priced at $0.01

  • If you are using printing credit, create a "resource rate" charged in uses and with a price of $1. You can then add a number of units of this rate as part of your price plans or products. Remember, the amount you type would be in credits. So, for example, if you have a plan including 100 pages, the amount of c credit to add would be 500 units (500 credits / 5 credits per page = 100 pages)